Clean-Tact

Contact Cleaner, D-Oxidizer

We recommend cleaning and di-oxidizing all contacts once each year. There are many contact cleaning products on the market. Some are priced as much as $40.00 for less than a one ounce bottle. Ours uses a chemical action to remove debris and does so far more effectively than competing cleaners and at a lower price. We provide a large 2 oz bottle, enough to take care of a large and elaborate system several times over. All competing products that we have seen are a one liquid one step procedure. We believe that one step solutions can not remove all debris, corrosion and oxidation that develops on you connectors. They simply dislodge the debris, but it remains on the contact surface; some of it visible; some of it invisible.

Below is a copy of the instructions enclosed with CLEAN-TACT. Reading it should show why our two step is more effective.

INTRODUCTION:

All competitor contact cleaners that we know of are a one part one step cleaner. Whereas, ours is a two step cleaner. The one step cleaners will dislodge corrosion and other debris but cannot completely wipe them away.

INSTRUCTIONS:

SOLUTION "A"

Shake well. Place a small amount of the solution on a thin cloth and rub all contact surfaces. Gently rub the contact surfaces. There is no need to rub vigorously because the Solution A will dislodge any corrosion and debris preparing it to be completely removed by the chemical action of solution "B". Then remove all visible (and invisible residues with a dry. For RCA female phono jacks, we recommend using pipe cleaners, (included) and available from tobacco shops for refills, preferably one that is stiff and that will act in a mild brush-like manner. Insert the pipe cleaner in the jack and push it in and out to clean and dislodge any dirt and corrosion.

SOLUTION "B"

DO NOT SHAKE BEFORE USING. Shaking the solution before application will start a foaming action prematurely and lessen the cleaning effectiveness. Solution "B" contains a foaming agent that foams when brought in contact with the residue of solution "A". This chemically induced foaming action allows for easy wiping away of all corrosion and debris dislodged by Solution "A". . This is a process that one step competing cleaners cannot do.

Place a small amount of the solution on a cloth and wipe away all dislodged residue. Again, no need to rub vigorously with Solution "B". Wiping gently easily wipes away all of the dislodged residue. Clean out all of the RCA connectors of dislodged debris that solution "A" dislodged using pipe cleaners saturated with solution "B".

We recommend cleaning all contacts no less than once per year.