VI-6 MK II Composite Video

Video Interconnect (exact 75 ohm Impedance)

The VI-6 is made using our poprietary silverfuse conductors for both the center conductor and braided shield/return. The connectors are high quality, machined and gold-plated. In the development of this cable for the video signal, we have found that the most important design aspects of its construction are the use of high quality material and, most importantly and where ours excells, is in the maintenance of ultra tight control of all dimensional tolerances. This is especially critical in the combined concentricities of the center conductor, coaxial insulator and outer braided shield.

The VI-6 provides exceptional picture definition and color purity. Other high-end cable companies have interconnects which sell for as much as $325.00 per meter, but none we have seen outperforms ours. Some competitors have also added low priced models to their line - some lower than ours. These are not serious contenders. They are no doubt made available for the customer who is satisfied with simply getting a picture. We have not taken this approach. We have available one model only and have gone all out to produce a picture that is as close as possible to the movie theatre experience, and at a price far below the best models our competitors have to offer. See customer reviews at audio review.

EXPLANATION OF OUR PROPRIETARY SILVERFUSE CONDUCTOR MATERIAL: Silverfuse is a near alloy of silver and copper. The copper used in this process is Single Crystal Continuous Cast Copper. It has unique physical and chemical properties, such as considerably longer granules with absolute absence of gaseous impurities such as oxygen, carbon, hydrogen and nitrogen. It is free from impurities (up to 99.99998% pure copper). It is far better than continuous cast Oxygen Free High Conductivity wire (OFHC). IT IS NOT SILVER PLATED. Silver plating causes a dioding effect when signal is passed through resulting in brightness and distortion. Because silver plating has a bad reputation, some manufacturers try to disguise the fact by calling it silver coated, silver clad or silver/copper hybrid. But they are all silver plated. Our Silverfuse process starts with Single Crystal Continuous Cast Copper wire with a diameter that is slightly larger than the required size. It is then pulled through a trough of molten silver. The wire with a silver deposit is then forced through a compacting process where it is subject to tremendous pressure. The silver and the copper are fused together into a near alloy. The compacting fusion also reduces the wire diameter to the desired size. No dioding subsequently occurs with this process. The result provides for the benefits of silver; which are excellent definition and clarity, with the high purity copper benefits of warmth and mellowness. (Incidentally, pure silver wire also causes brightness)
The Competition: up to $325/meter